INDUSTRIAL MACHINE

SAFTY AND AUTOMATION 

MOTION CONTROL USES AN INCREAMENTAL 365 DEGREE ENCODER TO  MONITOR THE POSITION OF THE RAM AFTER INCH UP TO ZERO POSITION. THERE ARE 10 REALYS THAT TURN ON AND OFF BASED ON YOUR PRESET CHANNEL "START STOP" DEGREES.

THESE CAHANNELS ARE USED IN AUTOMATION NEEDS DURING THE 365 DEGREE ROTATION.

HOLDING THE RESET BUTTON FOR A LITTLE WHILE TAKES YOU INTO PROGRAMMING MODE AND FROM THERE WILL BE VERY EASY TO SET THE LIMITS FOLLOWING THE INSTRUCTIONS.